Ga naar de hoofdinhoud Ga naar de zoekopdracht Ga naar de hoofdnavigatie
OPITEC Nederland0725094771
Direct bestellen

Tempex- en hardschuim snijder

Tempex- en hardschuim snijder

Draadloze snijder, ideaal voor hardschuim platen, styrodur en styropor®, plus 3 snijdraden. Werkt op batterijen, excl. 4 batterijen 1,5 V (AA).
Technische...
Meer productinformatie

€ 25,55

Beschikbaar, levertijd: 3-5 werkdagen

Hoeveelheid
Producthoeveelheid: Voer de gewenste hoeveelheid in of gebruik de knoppen om de hoeveelheid te verhogen of te verlagen.
Geen minimum bestelwaarde
Gratis verzending vanaf € 150
Productnummer:
305672
Toevoegen aan verlanglijstje
Productgalerij overslaan

Klanten kochten ook

OPITEC riksja GSM houder
Productnummer: 106234
OPITEC riksja GSM houder
Normale prijs: Van € 3,83
Planetarium van Copernicus
Productnummer: 804730
Planetarium van Copernicus
Normale prijs: € 51,25
OPITEC Easy-Line houten huis
Productnummer: 115305
OPITEC Easy-Line houten huis
Normale prijs: Van € 5,99
Penselen set, rond en plat, 10-delig
Productnummer: 665280
Penselen set, rond en plat, 10-delig
Normale prijs: € 5,99
edding 16 Funtastics Window pennen, 5 stuks
Productnummer: 501115
edding 16 Funtastics Window pennen, 5 stuks
Normale prijs: € 10,15
(€ 2,03 / 1 Stuk)
Easy-Line solar & hydraulische robot 12-in-1
Productnummer: 121021
Easy-Line solar & hydraulische robot 12-in-1
Normale prijs: € 36,85
Papieren tassen (24 x 12 x 31 cm) wit, 10 stuks
Productnummer: 488985
Papieren tassen (24 x 12 x 31 cm) wit, 10 stuks
Varianten van € 7,15
Normale prijs: € 11,05
(€ 1,11 / 1 Stuk)
Acrylverf glanzend glossy (500 ml) wit
Productnummer: 472270
Acrylverf glanzend glossy (500 ml) wit
Normale prijs: € 12,25
(€ 24,50 / 1 liter)
De Kepler telescoop
Productnummer: 839339
De Kepler telescoop
Normale prijs: € 7,00
OPITEC Easy-Line behendigheidsspel zenuwspiraal
Productnummer: 111563
OPITEC Easy-Line behendigheidsspel zenuwspiraal
Normale prijs: Van € 4,28

Tempex- en hardschuim snijder


Tempex- en hardschuim snijder

Draadloze snijder, ideaal voor hardschuim platen, styrodur en styropor®, plus 3 snijdraden. Werkt op batterijen, excl. 4 batterijen 1,5 V (AA).
Technische gegevens:
Snijhoogte: §ca. 65 mm
Doorlaathoogte: §ca. 210 mm
Snijdraad temperatuur: §tot 300°C
Bedrijfsspanning: §6 V

Downloads & handleidingen